Elastic silicone discのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Elastic silicone disc - メーカー・企業と製品の一覧

Elastic silicone discの製品一覧

1～8 件を表示 ／ 全 8 件

表示件数
0339 Prevention of Crosslinking Blockage in Polyethylene Resin

0339 Prevention of Crosslinking Blockage in Polyethylene Resin

In addition to aeration, you can also expect effects from vibration; we are using this equipment!

We would like to introduce a case where our equipment was adopted for the construction of a new plant for a chemical company. In the evaluation of the flowability of the target material using a powder tester, it was determined that "crosslinking prevention blockage measures: unnecessary." However, based on user experience, it is essential to have aeration. Therefore, in addition to aeration, we have adopted this equipment, which is expected to provide effects through vibration. 【Overview】 ■ Hopper diameter: 1400φ ■ Discharge diameter: 150A ■ Gas used: N2 This equipment can be used without any issues not only with air but also with inert gases such as argon and nitrogen. ■ Material particle size distribution: (Dv50) 300μm ■ Material density: 0.4 *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0464 Measures to Prevent Clogging of Crushed Automotive Interior Materials

0464 Measures to Prevent Clogging of Crushed Automotive Interior Materials

Measures to address the clogging of crushed products! The tests yielded good results, and we decided to purchase immediately.

We would like to introduce an example of measures taken to address the clogging of crushed automotive interior materials. We received a consultation regarding frequent clogging of crushed materials at the recycling plant. The customer strongly expressed their desire to "quickly test the actual machine and implement it if the results are good," so we promptly sent the blow disc and controller on the same day. The test yielded favorable results, and the customer decided to make a purchase immediately. 【Case Overview】 ■ Installation Target: Lower end of the hopper for the screw feeder (Installation dimensions: approximately 300×200) ■ Target Material: Crushed automotive interior materials (Size: φ20 or less) 【Key Points of Our Equipment】 ■ The elastic disc (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. Our silicone disc is highly superior in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared.

  • Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0510 Prevention of retention in the eccentric hopper

0510 Prevention of retention in the eccentric hopper

Compliance with the Food Sanitation Act! Here is an introduction to cases where Brody disks and controllers have been used.

The equipment was used because the material was accumulating on the gentler slope of the eccentric hopper. The elastic disk (silicone disk) of this equipment boasts extremely high durability compared to general silicone rubber. It also complies with food sanitation laws, and related documents can be submitted. Please let us know if you need them. 【Case Overview】 ■ Hopper ・Diameter: φ500 ・Discharge diameter: φ150 ・Slope: 45° (the gentlest part) ■ Target Material: Grain powder ■ Broady Disk Arrangement ・Three standard broady disks are installed mainly at the gentler slope. 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what to do. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0613 Elimination of potassium sulfate bridge

0613 Elimination of potassium sulfate bridge

Air ON with the Brodisk at a time delay! Introducing a case that resolved a problem in one shot.

We received a consultation regarding a problem where a bridge occurs in the newly introduced air transport tank. The equipment flow is "air transport → dust collector → hopper → rotary valve → screw feeder," and even when poked with a stick, it only creates a hole and does not come out easily, resulting in a situation where it took a long time to finally resolve. Therefore, we installed a total of 8 Brody disks (BD-15) in 2 tiers. This completely resolved the issue. 【Case Summary】 ■ Equipment Flow: Air transport → dust collector → hopper → rotary valve → screw feeder ■ Problem Situation - Bridging in the hopper - Does not come out easily even when poked with a stick (only creates a hole) - Takes a long time to finally resolve *For more details, please refer to the PDF document or feel free to contact us.

  • Other powder equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0365 Delivered to the feed factory.

0365 Delivered to the feed factory.

Introduction of a case where 12 Brodisk standard types were installed.

We have delivered BroaDisk to a feed factory for pig farming. In the case of a silo with a capacity of about 50 tons, there were concerns about bridging, and measures against bridging were implemented using foreign-made equipment. However, it seems there were many failures and troubles, which led to the adoption of our equipment. Since then, it has been operating well, and we have received numerous repeat orders. In this case, we installed 12 standard BroaDisks (BD-15) and used a controller with 6 built-in solenoid valves to sequentially turn on air to 6 locations, with 2 BroaDisks at each location. 【Product Specifications】 ■ BroaDisk: BD-15S-W 12 units ■ Controller: C-SV6 1 unit * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0401 Improvement measures for existing users (calcium hydroxide)

0401 Improvement measures for existing users (calcium hydroxide)

After the implementation of the improvement measures, we have received feedback that there are no longer any rat holes at all!

This is a case inquiry from a user who has already installed a Brodisk. Although they purchased and installed the Brodisk as a measure against rat holes, they consulted us because they observed that the rat holes had not been resolved upon visual inspection of the inside of the hopper during maintenance. As a countermeasure, we advised them to increase the number of Brodisk installations, reconsider the placement, use a controller with four solenoid valves, and review the air piping (such as tube diameter conditions), which they implemented. After implementing this improvement plan, the user reported that there were no rat holes at all. [Overview of Usage Conditions] (Placement overview and control after improvement) ■ Hopper dimensions: 1500×1500 ■ Approximate dimensions of hopper discharge area: 300×300 ■ Placement overview: 2 units on one side, totaling 8 units installed ■ Control: Air is turned on sequentially in pairs with a time delay using a controller that incorporates four solenoid valves. *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0481 The silicon disk of this device is highly durable!

0481 The silicon disk of this device is highly durable!

The thickness and shape of the disk are also determined with durability in mind! We assist in selecting the model of this equipment and planning its layout according to the customer's situation!

We received contact from a customer using other bridge breakers as a countermeasure for the lime silo bridge. After starting operation, the rubber disk-type aerator in use was damaged within a short period, and even after replacement, it failed again in a similar short time. Therefore, the customer consulted us about wanting to use our blow disk. The material used for the elastic disk of the blow disk is a very special silicone rubber, which is significantly more durable compared to general silicone. Additionally, the thickness and shape of the disk have been determined with durability in mind. We provided the customer with detailed information including this, and they adopted our equipment, later evaluating that no troubles like those experienced previously have occurred. 【Product Specifications】 ■ Blow Disk BD-15S-B 8 pieces *For more details, please refer to the PDF document or feel free to contact us.

  • Other powder equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
0612 Preventing rat holes in high-viscosity fine powders

0612 Preventing rat holes in high-viscosity fine powders

Easy to install and high cost performance! Brody Disk installation case study.

We would like to introduce a case where the rat hole phenomenon occurring in a hopper (with a steep incline) for highly viscous powder raw materials was resolved. Three standard Brody disks (BD-15) were installed at the same height in three tiers, totaling nine units. This equipment is easy to install and offers high cost performance, but the installation position is crucial. Please feel free to contact us when you need assistance. 【Case Overview】 ■ Equipment Flow - Raw material input via a flexible container → Raw material hopper (where the rat hole occurs) → Supplied to the next process via a rotary valve 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disks in this equipment are exceptionally strong and durable. We believe you will understand this once you use it! ■ Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

  • Mixer/agitator

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.